TS8000-CM Eval Board

Triad Semiconductor’s TS8000-CM combines Triad’s TS8000 Ultrasonic Receiver IC with an ultrasonic transducer and supporting discrete components onto a PCB module with castellated pads. The TS8000-CM supports 40kHz Piezo Transducers and MEMs microphones. The module has a 4-pin flex cable connector that connects DVDD, Ground, Clock and Data to the module. The module comes populated with the MEMs microphone soldered to the board. A 10mm 40kHz piezo transducer is provided with TS8000-CM kit. The piezo transducer can be soldered onto the back of the TS8000-CM module for use in place of the MEMs microphone.

  • Castellated module for evaluating the TS8000 40kHz Ultrasonic Receiver
  • TS8000 and support circuitry
  • Castellated module for soldering onto carrier board
  • MEMs microphone and 40kHz piezo receiver ultrasonic sensor support
  • 4-pin flex cable connector and flex to 100mil center breakout board
  • Arduino library for calibration and configuration


Out of stock

Join the WaitlistJoin the waitlist to be emailed when this product becomes available


  • Complete Ultrasonic Receiver Analog Front End (AFE)
  • Receiver for 40kHz Ultrasonic Pulses
  • Built in system calibrated bandpass filter for ambient noise rejection and operation in noisy environments
  • Configurable high gain amplification of weak ultrasonic signals
  • Configurable threshold data slicer for ultrasonic carrier waveform digital output
  • Two-wire control bus for configuration, calibration, and mode control
  • DVDD: 3.3V. Built in LDO for generation of clean analog supply


  • Ultrasonic range finder
  • Ultrasonic time-of-flight
  • Tracking of Physical Objects in VR
  • Ultrasonic communication
  • Object detection and security systems
  • Proximity detection
  • Gesture recognition

Related Products

Triad Part NumberDescription
TS800040kHz Ultrasonic Receiver AFE